|1911 End Mill Bit Set (SKU: T1551)This bit set contains all the tooling to rough cut the 1911 frame and drill sear and hammer pin holes. Included: #22 Drill Bit, #35 Drill Bit, #52 Drill Bit, High Speed Steel 7/64″ Key Cutter and High Speed Steel 1/2″ End Mill. (NOTE: All these end mill bits are designed for use in an end mill. A drill press is not recommended.)||66/73 Rifle Magazine Tube End Cap Wrench (SKU: T1380)66/73 Rifle Magazine Tube End Cap Wrench is the perfect tool for loosening or tightening the end caps on Winchester Model 1866 and 1873 magazine tubes. Made by Saber River Gunsmithing™.||AR Bolt Catch Pin Punch (SKU: T1368)This AR Bolt Catch Pin Punch is specially designed for removing the AR-15 bolt catch pin.||AR Fixture (SKU: T1547)This fixture is required to rough cut the AR-15 Lower Receiver and drill sear and hammer pin holes. (NOTE: This fixture can be used with an end mill or a drill press. The Bit Set is not included.)||AR-15/M-16 Armorer's Wrench (SKU: T1394)AR-15/M-16 Armorer's Wrench. "The Preferred Armorer's Wrench of US Armed Forces and Law Enforcement Agencies!||AR15 Scraper (SKU: T1502)The AR15 Scraper is specially designed to clean the entire bolt carrier group. The precise-sized grooves and cleaning edges perfectly fit 12 critical bolt carrier group surfaces for faster, easier cleaning. Compact, light weight and easy to carry.|
Drymate® Gun Cleaning Pad (SKU: T1283)Drymate® gun cleaning pad. Protects your table and firearms from scratches and spilled cleaning fluids. Available in sizes for Pistols and Rifles.
(See web page to select size.)
|FINI Universal Choke Tube Wrench (SKU: T1501)The pocket size FINI™ makes it a snap to quickly and easily change a choke tube in the field or on the bench. 6-in-one FINI™ fits all choke tube gauges.||Front Sight Polish Kit (SKU: T1559)Shines your front sight to make it quick for the eye to eye and more visible in dim light. Kit works on bare metal front sights including Brass, Silver, and all polished or white sights. Kit Includes: 1 double-sided leather-faced polishing stick and 0.3 oz polishing compound.||GBA Gas Block Aligner (SKU: T1511)The Gas Block Aligner ensures perfect alignment between the gas port hole in your AR15 barrel and gas block. Works with any standard 3/4″ inner diameter gas block and barrel combination, regardless of manufacturer. The Gas Block Aligner is available in both .22 caliber and .30 caliber.||Handi-Racker (SKU: T1539)The Handi-Racker is a Pistol Racking Assistive Device. It allows you to use your arms and body to rack the slide without requiring a strong grip on the slide. (See web page for details and to order the correct size for your pistol.)||Heated Ultrasonic Gun Cleaner (SKU: T1357-6)Heated Ultrasonic Gun Cleaner with 6 Liter (1.58 Gallon) tank capacity and 180 Watts of Ultrasonic Power.|
|MAGCATCH TOOL for AR-15 (SKU: T1290)The MAGCATCH Tool™ is designed for removing or installing an AR-15 magazine catch.||PUSHTOOL for AR-15 (SKU: T1289)The PUSHTOOL™ is the most practical tool on the market today for removing AR rifle push pins.||Ultimate Bench Block (SKU: T1381)The Ultimate Bench Block is made from heavy gauge aluminum channel filled with a tough but soft polymer that won't scratch or mar gun finishes.|