| Items: | 0 |
| Subtotal: | $0.00 |
Bullet & Cartridge Handling
 Bin-Shelf (SKU: T1633)The Bin-Shelf™ provides a platform to support the weight of the Cartridge Bin on Dillon XL 650 presses.
|
 Dillon XL 650 Case Chute Extension (SKU: T1590)The Dillon XL 650 Case Chute Extension lenghtens the original cartridge ejection chute by 6.25″, allowing you to use a larger container to capture the loaded cartridges. Just set any convenient container on the bench and position it under the chute. Note: Press must be on a Strong Mount.
|
 Loaded Round Counter (SKU: T1555)The UniqueTek Loaded Round Counter is an electronic counter for your Dillon press that counts only successfully loaded rounds ... not just press cycles. Can also be used on many other reloading presses that have: 1) Have a Crimp Die with an open top, and 2) Have a primer tube or similar place on which to mount the LCD Display Module.
|
 The Bin-Dam (SKU: T1359)The Bin-Dam™ fits into the front of the Cartridge Collection Bin for Dillon, LEE and RCBS reloading presses. It keeps rounds from rolling out and onto the floor when the bin gets near full. Allows use of 100% of bin's capacity. Available in three sizes to fit the cartridge collection bins for SDB/550/650 presses, the 1050 press, and for the SL 900 Shotshell Loader.
|
 The Bullet Bin (SKU: T1446)The Bullet Bin™ is an economical alternative to the Dillon Bullet Tray. Easily holds a full 500 count box of 9mm 124grain bullets ... with room to spare.
|