Click to enlarge image(s)
Inactive Product icon
This product is no longer available at UniqueTek.

The TURBO-BEARING® for Dillon RL 550 presses will smooth the indexing and reduce the play and wobble in the shell plate. With the kit installed, you will be able to tighten the shellplate bolt tighter to reduce wobble, while still being able to index the shellplate freely.

Included in Kit:
1 Index Sprocket
1 Needle Roller Thrust Bearing
2 Thrust Washers

Also works on BL 550 press.
Will NOT work on the Dillon RL 450 press.

Q: Will I need an Extended Shellplate Bolt when I install the TURBO-BEARING?
A: Possibly. The only way to tell is to see how much of the OEM Shellplat Bolt shoulder is visible in the hole for the brass tip set screw on the press ram without a shellplate bearing installed. If the brass tip of the set screw isn't making 100% contact on the shoulder of the OEM Shellplate Bolt, then you will need the Extended Shellplate Bolt.

TURBO-BEARING is a registered trademark of Slash K Inc.
Thrust Bearing 16 Needle Bearings
Thrust Washer 58 HRC Hardness
Index Sprocket Custom Molded Plastic with Pocket for Bearing Set
Features Benefits
Smooths Shellplate Indexing
Reduces Shellplate Play & Wobble

Customer Reviews

Average rating from 1 reviews: 5.0
The Turbo bearing works very wellI installed the turbo bearing on my 550B press several months ago, It works as advertised, indexing is much smoother and I have not had any powder come out of the top of cartridges, not even 9mm or 45 ACP. I highly recommend this addition to the Dillon press. Written by Cal Smith on Tue 3 Oct 2017 12:47:32 AM GMT
Submit a Review...