![]() |
Click to enlarge image(s) |
Included in Kit:
— 1 Oilite® Plus Oil/Teflon® Lubricated Thrust Bearing
— 1 Polyamide-imide Index Ball
— 1 Reduced Tension Index Ball Spring (Stainless Steel)
— 2 Index Ball Spring Adjustment Washers (Stainless Steel)
— Instructions
✓ Works on BL 550, RL 550, XL 650, XL 750 and SL 900 presses.
Easy Drop-In Installation
The custom reduced tension index ball spring means you don't have to worry about cutting the OEM spring. Just drop it into place and you are good to go! If your feel that the spring is too light, two washers are included to incrementally increase the spring tension. The spring and washers are stainless steel for corrosion resistance.
Polyamide-Imide Index Ball
The Polyamide-imide Index Ball is a fraction of the mass of the OEM steel ball (0.62g versus 3.52g). That is 82.4% lighter! Due to the lower mass, it doesn't violently hammer the bottom of the shellplate when it engages the detent … and thus doesn't toss powder out of the case. The Polyamide-imide ball is also much harder and more wear resistant than balls made from other plastics (e.g. 26% more wear resistant than Delrin®).
Oilite® Plus Bearing
The Oilite® Plus Thrust Bearing is sintered bronze lubricated with Oil/Teflon®. It never needs lubrication and the Teflon® reduces friction 17% compared to a standard oil lubricated Oilite® bearing.
It is also thinner than other bearing kits using a needle roller bearing … yielding more engagement of the shellplate bolt threads in the ram.
Manufactured Exclusively for UniqueTek by JW Systems. Oilite is a registered trademark of Beemer Precision, Inc. Teflon is a registered trademark of Chemours. |
![]() |
See Also
Customer Reviews
Average rating from 6 reviews: 5.0 | Showing: 3 of 6 | Show All |
Submit a Review...