|Click to enlarge image(s)|
These Powder Funnels are specially designed for the needs of bullsey shooters loading Double Ended Wad Cutter (DEWC) or Hollow Base Wad Cutter (HBWC) bullets in .38 Special cartridges. These bullets are much longer than normal bullets and seated flush to the case mouth. The original powder funnels just don't reach deeply enough into the case to properly prepare the case for seating these bullets.
• Precision Machined from 12L14 Steel
• Case Hardened to RC55+
• Expander Tip Dimensions Optimized for use DEWC or HBWC Bullets
• Highly Polished Expander Tip for Smooth Release
• Smoother Interior for Smooth Powder Flow
• Drop In Replacement for Original Dillon Powder Funnel *
• Works on RL 550, XL 650, Xl 750, RL 1050, Super 1050 and RL 1100 Presses †
* Powder Die adjustment will still be required.
† Will not work on SDB press because the shellplate begins indexing before the powder funnel clears the case mouth.
— DEWC (T1735-01): For DEWC bullets up to .358″ diameter and up to .615″ long.
— HBWC (T1735-02): For HBWC bullets .358″ to .360″ diameter and up to .625″ long.
The following article by Ed Harris contains tips on reducing bullet deformation while seating and on full length sizing for reloading either DEWC or HBWC bullets.
These postings on the Bullseye Forum discuss how loading HBWC requires attention to details with crimping and sizing cases back to specs. In particular, note the posts by David Wilson / fc60 and pay close attention to his explanation of brass expansion/bulging at the tapered area.
|Manufactured by Photo Escape, Inc.
Although both DEWC and HBWC are shown in photo, they are sold individually.
|Average rating from 1 reviews: 5.0|
turret and today Dillon. It's always been a hassle to get the correct flare to seat the
HBWC. Not anymore loaded 50 as soon as I received it, no problem with the flare.
Opens up the case without a gross flare which was also hard on the case mouth.
Thanx for stocking a great product.