|Click to enlarge image(s)|
Ever get tired of watching the clock for your case cleaner? Wish you could set it for a specific amount of time and then just walk away, confident that it will shut off when the timer runs out? That is exactly what the Time-Out™ Case Cleaner Timer will let you do!
Plug the timer into an electrical outlet, plug your case cleaner into the timer, then just set the time and press start. The power shuts off when the time counts down to zero and you are free to take Time Out from watching the clock!
Time Up to 10 Hours!
With a 10 Hr time limit and 1 min setpoint intervals, the Time-Out™ Case Cleaner Timer gives you precise control over the time your case cleaner runs.
Want to pause to inspect cleaning progress? Simply press the "MANUAL" button. To continue press the "MANUAL" button again. The Time-Out™ will resume timing right where it left off.
Dual outlets allow you run two case cleaners simultaneously!*
* Both outlets switch ON and OFF at the same time and are controlled by a single timer setting.
Heavy Duty 15 Amp Rating
The Time-Out™ contains a heavy duty relay and is rated for a max load of 15 Amps. This makes it beefy enough to handle even the largest capacity vibratory or tumbler case cleaners.
Replaceable Backup Battery — NEW!
The NiMH rechargeable battery in the original Time-Out™ has been replaced with a CR2032 Lithium battery that is easily replaceable. Since there is no charger circuit, the Time-Out™ draws zero current when not being used.
♦♦♦ Reviewed in Front Sight; July/August 2007, Pages 57-58. ♦♦♦
"I got one of these case cleaner timers from you about a year ago [September, 2010]. This is a must have accessory for the case cleaners. I always load up the cleaner at the end of a reloading session and let the timer turn them off for me. Hate to admit it but I have let it run all weekend one time, and that is when I ordered the timer from you. Thanks for being on the lookout to make reloading fun and safe."
— Randall P. - Fresno, CA
Also Has Security Timer Functions
The Time-Out™ Case Cleaner Timer can also be used as an energy saving and security timer.* It has 7-day cycle and can be programmed with up to 8 ON/OFF times per day. Unlike typical analog security timers, switch intervals can be set as close as one minute apart! You can set your own program or use one of the 8 preset programs.
|For Indoor use only. Keep away from moisture.
Time-Out is a trademark of UniqueTek, Inc.
|Input||125VAC / 60Hz|
|Plug Type||3-Prong Grounded (Type B / NEMA 5-15)|
15A /1875 Watt Resistive
15A /1875 Watt Tungsten
|Operating Temperature||14°F to 104°F (-10°C to 40°C)|
|Back Up Battery||CR2032 Lithium Battery (Easily Replaceable)|
|Dimensions||4.32″ H x 2.7″ W x 2.0″ D (11cm H x 6.9cm W x 5.1cm D)|
|Weight||5.72 oz (162.2g)|
|CSA Certification||Complies to UL Standard 916|
|LCD Display||Easy to Read|
|Max. Set Time = 9 Hr 59 min||No Need to Restart Timer Multiple Times|
|Min. Set Time = 1 min||Gives you Complete Control of Time Interval|
|Dual switched outlets (only one visible in photo)||Time Two Polishers at the Same Time|
|Can be used with all Vibratory or Tumbler type case cleaners||Universally Compatible|
Submit a Review...