|Toolhead Clamp Kit (SKU: T1230)The UniqueTek Toolhead Clamp Kit™ enables your Dillon 550, 650 and 750 toolheads, and RCBS Pro 2000®/Piggyback™ -3 & -4 dieplates, to be CLAMPED into the press frame. This corrects the loose fit between the toolhead and press frame, thus reducing OAL variation and improving die-to-shellplate alignment.||D-Lead® Abrasive Hand Soap (SKU: T1232)A hand soap for shooters and reloaders that removes Lead and other heavy metals from your hands. Contains silica for extra heavy-duty cleaning action.||
D-Wipe Towels (SKU: T1233)Lead decontamination toweletes. Remove lead and other metals from your hands, tools and washable surfaces without water.
40ct & 150ct Canisters" (5.5″ x 8″ towelettes).
22ct Box of "Singles": (6″ x 7″ towelettes).
|Digital Calipers (SKU: T1236)A "must have" for your reloading bench. Digital Calipers are easy to read and provide instant conversion from inch to metric measurements.||Dri-Slide® Improved Weapons Lubricant (SKU: T1247)Dri-Slide®Improved Weapons Lubricant is a versatile penetrating formula of Super Fine grade Moly with rust and corrosion inhibitors. Newly reformulated specifically for the requirements of weapons lubrication.||Micrometer Powder Bar Kit (SKU: T1231)A micrometer conversion kit for the powder bar of your Dillon Auto Powder Measure.|
|UniqueTek Premium Firearms Cleaner (SKU: T1254)UniqueTek Premium Firearms Cleaner™ is a highly efficient solvent-based cleaner for all firearms. Being virtually odorless and nontoxic, it is safe to use indoors where ventilation may be poor. Since it contains no aromatic solvents it won't swell rubber or plastics. (See product web page to select bottle size.)||Foam Grip (SKU: T1527)This foam grip cushions your hand yet provides good "feel" when seating primers. Fits both the Plastic and Aluminum Dillon Roller Handles … as well as most other press handles that are approximately 1" diameter and 4" to 5" long. Sold in a 2-Pack.||66/73 Rifle Magazine Tube End Cap Wrench (SKU: T1380)66/73 Rifle Magazine Tube End Cap Wrench is the perfect tool for loosening or tightening the end caps on Winchester Model 1866 and 1873 magazine tubes.||Carbon Fiber and Ceramic Knife (SKU: T1387)This unique folding knife has Solid Carbon Fiber Handles and a 3-1/4" Black Ceramic Drop-Point Blade. Total weight is only 60 grams (2 oz)!||
AR Emergency Repair Kit (SKU: T1423)This AR Emergency Repair Kit contains the parts that are most frequently lost or broken on AR-15 Rifles. Includes: Enhanced Extractor Spring, Take Down Detent and Spring, Firing Pin Retaining Pin, Buffer Retaining Pin and Spring, Hammer/Trigger Pin Set of 3 Gas Rings for Gas Impingement Rifles
||Port-A-Stand 'H' (SKU: T1426-H)The Port-A-Stand™ 'H' sets up in just seconds! Just rotate the legs into position, place on ground, and insert the target frame. There are no parts to assemble ... or lose. When done shooting, it quickly folds for easy transport and storage. You can even hang it on the wall using one of the stake holes! Traditional H-shape for maximum stability and wind resistance.|
|Die Wrench for Dillon Presses (SKU: T1532)The best and last die wrench you'll ever need for your Dillon press. Fits Both 1″ and 1-1/8″ Die Lock Rings.||10/22 Extended Magazine Release (SKU: T1402)10/22 Extended Magazine Release is longer than the standard factory release, making it easier and faster to release the magazine on Ruger® 10/22® rifles. Drop-in fit requires no modification to the rifle. Avaialble in either black or stainless steel finish.||MK-II Extended Magazine Release (SKU: T1401)MK-II Extended Magazine Release made by Ranch Products provides increased length and better purchase for faster, easier magazine changes. Fits all Ruger MK-I and MK-II pistols. Available in black or stainless finish.||Glock Extended Take Down (SKU: T1400)Extended Slide Lock makes disassembly of Glock firearms easier. It is just 0.040" (1mm) wider on each side than the original Glock part. Available in black steel or nickel plated steel finish.||AR-15 Bolt Release Lever (SKU: T1355)This AR-15 Extended Bolt Release Lever allows right-handed shooters to release the bolt catch without having to reach over the top of the AR-15 to close the action. Designed by Bob Hahin; designer of the Original Bob Sled!||Original Bob Sled (SKU: T1354)The Original Bob Sled Single Round Loading Device For Slow-Fire Competition, Benchrest and Varminting.|
|Arredondo Powder Drop Slide with Micrometer (SKU: T1267)The Arredondo Accessories Powder Drop Slide with our Micrometer Powder Bar Kit preinstalled. For the Dillon Precision auto powder measure. See product page to order the correct version for your press.||Loaded Round Counter (SKU: T1555)The UniqueTek Loaded Round Counter is an electronic counter for your Dillon press that counts only successfully loaded rounds ... not just press cycles. Can also be used on many other reloading presses that have: 1) Have a Crimp Die with an open top, and 2) Have a primer magazine tube or similar place on which to mount the LCD Display Module.||Shell Sorter (SKU: T1356)The Shell Sorter™ is a simple product designed to reduce the time spent sorting brass by caliber, allowing you to enjoy more time reloading and shooting. (See web page to select the correct Shell Sorter™ configuration for your needs.)||2X Powder Hopper Tube (SKU: T1277)The 2X Powder Hopper Tube™ doubles the powder capacity of the Dillon Auto Powder Measure or "Belted Magnum" Powder System.||Precision Powder Baffle (SKU: T1278)Pecision Powder Baffle™ upgrade for Dillon powder measures.||UpLULA (SKU: T1292)The UpLULA™ loader is a military-quality universal pistol magazine loader for 9mm Luger up to .45ACP rounds and magazines.|
|HygroSet Digital Hygrometer (SKU: T1324)HygroSet™ Digital Hygrometer monitors the temperature and relative humidity at your reloading bench, powder storage cabinet or in your gun safe.||Eva-Dry Renewable Mini-Dehumidifier (SKU: T1330)The The Eva-Dry Renewable Mini-Dehumidifier has been designed to absorb moisture from small enclosed areas such as a gun safe. To renew, just plug into any wall outlet for 8-10 hours.||Sure Site Clay Target Hangers (SKU: T1317)Sure Site™ Clay Target Hangers. Available in Black or Yellow and in bags of 20 or 100 and bulk boxes of 1000! See product page for details and prices.||THERMOLD .223 Stripper Clips (SKU: T1313)THERMOLD™ Stripper Clips for .223/5.56mm NATO rifle cartridges are made from Zytel® nylon and work with GI stripper clip guides and with StripLULA stripper clip loader. Available in 10 count, 100 count and 1000 count packages. (See web page to select package size.)||Handgun Hangers (SKU: T1328-4)Handgun Hangers™ are are a one-gun pistol hanger that can be attached to any standard 3/4" thick shelf.||Rifle Rods (SKU: T1327)Rifle Rods by Gun Storage Solutions will expand the capacity of your safe, provide easy access, and minimize the risk of damage to your guns. For less money that the tax you would pay on a new gun safe, you can make your safe organized and at the same time hold more guns!|
D-Lead Hand Soap (SKU: T1262)A non-abrasive soap for shooters and reloaders that removes Lead and other heavy metals from your hands. (Also available in 1 gal bottles)
8 fl. oz. (236 ml) bottle.
Moon Clip - Ruger LCR, 9mm (SKU: T1419-14)Moon Clip Type: Full Moon Clip
Fits: Ruger LCR
Capacity: 5 rds
Package: 4 per pack (T1419-14)
|Deer Hunter Pen (SKU: T1265-06)This unique Bolt Action Pen is hand crated exclusively for UniqueTek by Silver Fox Pens. The pen ia available in Arizona Desert Ironwood (shown in photo) or Australian Eucalyptus Burl. Each pen is unique and there will be differences in color and grain between individual pens. (See the product web page for detailed photos.)||550 Primer Track Bearing (SKU: T1571)The UniqueTek 550 Primer Track Bearing has a 1.4″ extension that supports the primer bar better. Prevents the primer bar from "drooping" and binding while its in the "out" position. It is a drop-in replacement and takes just minutes to install. NOW with ROBAR® NP3® Plating (a Nickel/Teflon composite).||Swage It S550 (SKU: T1568-5)The Swage It S550 Primer Pocket Swager for the Dillon RL 550B press. Everything that you need to swage .223/5.56mm, .308/7.62mm or any other calibers that utilize small or large primers. Includes Swages for both small and large primers.||CNC Machined 550/650/750 Toolheads (SKU: T1333)CNC machined toolheads for Dillon RL 550, XL 650 and XL 750 reloading presses. Made from solid 6061-T6 aluminum and machined to exacting standards.|
|Powder Measure Drain-N-Change Tool (SKU: T1347)Powder Measure Drain-N-Change™ Tool. Allows users of Dillon reloading presses to drain gunpowder or change powder bars without removing the powder measure from the press or toolhead.||Heated Ultrasonic Gun Cleaner (SKU: T1357-6)Heated Ultrasonic Gun Cleaner with 6 Liter (1.58 Gallon) tank capacity and 180 Watts of Ultrasonic Power.||Multi-Function Gun Cleaning Brush (SKU: T1286)Multi-Function Gun Cleaning Brush cleans double-stack magazine tubes, AR upper receivers and 12GA shotgun chambers.||Squib Rod / Multi-Tool (SKU: T1287)The Arredondo Accessories Squib Rod/Multi-Tool is an essential item for your range bag. Also serves as a battery cap remover, windage adjustment tool and magazine base pad remover.||
Drymate® Gun Cleaning Pad (SKU: T1283-P)Drymate® gun cleaning pad. Protects your table and firearms from scratches and spilled cleaning fluids. Available in sizes for Pistols and Rifles.
(See web page to select size.)
|The Bin-Dam (SKU: T1359)The Bin-Dam™ fits into the front of the Cartridge Collection Bin for Dillon, LEE and RCBS reloading presses. It keeps rounds from rolling out and onto the floor when the bin gets near full. Allows use of 100% of bin's capacity. Available in three sizes to fit the cartridge collection bins for SDB/550/650 presses, the 1050 press, and for the SL 900 Shotshell Loader.|
|Ceramic 9mm Retractable Cutter (SKU: T1537)Ceramic 9mm Retractable Cutter. Ceramic Blade keeps its edge up to 40 times longer than a steel blade. So you can spend more time cutting and less time replacing blades.There are also No Metallic Components in the holder, so it is impervious to corrosion.||Custom Leather Lever Wrap for Lever-Action Rifles (SKU: T1563)This custom leather lever wrap is custom fitted for the lever on your model lever-action rifle. Cushions you fingers making cocking the lever easier, smoother and less painful. Perfect for Competition, Hunting and Target Practice! See the product page to order the correct wrap for your model lever-action rifle.||0.05-Grain Enhanced Electronic Powder Scale (SKU: T1391)The 0.05-Grain Powder Scale fills the gap between standard 0.1 grain accuracy scales, and high-precision 0.02 grain accuracy scales ... both in performance and price. It has 308 grain capacity with 0.05 grain accuracy||Floating Die 550/650 Toolheads (SKU: T1389)CNC Machined Floating Die Toolheads for Dillon RL 550, XL 650 and XL 750 presses. Size Die and Bullet Seat Die are floated for improved ammunition concentricity. Available only with Toolhead Clamp Kit™ parts pre-installed.||
Powder Measure Stand Adapter (SKU: T1573)The Powder Measure Stand Adapter allows you to store your spare Dillon Powder Measure on a RL550/XL650 Toolhead Stand.*
*Dillon Toolhead Stand not included.
|Port-A-Stand 'V' (SKU: T1426-V)The Port-A-Stand™ 'V' sets up in just seconds! Just spread the feet, place on ground, and insert the target frame. There are no parts to assemble ... or lose. Accepts 1"x2" furring strips and supports standard 18" width USPSA/IPSC/IDPA/NRA D-1 Targets cardboard targets.|
|Case Gauge - 9mm (SKU: T1574-01)Case Gauge for 9mm Luger. Made from Stainless Steel and built to last a lifetime. Each gauge is manufactured to S.A.A.M.I chamber/headspace specifications. The gauge will measure the maximum cartridge length (COL), the minimum and maximum case length, the maximum case diameter, and the minimum and maximum headspace.||Case Gauge - 40 S&W (SKU: T1574-04)Case Gauge for .40 S&W. Made from Stainless Steel and built to last a lifetime. Each gauge is manufactured to S.A.A.M.I chamber/headspace specifications. The gauge will measure the maximum cartridge length (COL), the minimum and maximum case length, the maximum case diameter, and the minimum and maximum headspace.||Case Gauge - .45 ACP (SKU: T1574-05)Case Gauge for .45 ACP. Made from Stainless Steel and built to last a lifetime. Each gauge is manufactured to S.A.A.M.I chamber/headspace specifications. The gauge will measure the maximum cartridge length (COL), the minimum and maximum case length, the maximum case diameter, and the minimum and maximum headspace.||Case Gauge - .38 Super Auto (SKU: T1574-02)Case Gauge for .38 Super Auto. Made from Stainless Steel and built to last a lifetime. Each gauge is manufactured to S.A.A.M.I chamber/headspace specifications. The gauge will measure the maximum cartridge length (COL), the minimum and maximum case length, the maximum case diameter, and the minimum and maximum headspace.||Case Gauge - .45 Long Colt (SKU: T1574-06)Case Gauge for .45 Long Colt. Made from Stainless Steel and built to last a lifetime. Each gauge is manufactured to S.A.A.M.I chamber/headspace specifications. The gauge will measure the maximum cartridge length (COL), the minimum and maximum case length, the maximum case diameter, and the minimum and maximum headspace.||Case Gauge - .38 Special (SKU: T1574-03)Case Gauge for .38 Special. Made from Stainless Steel and built to last a lifetime. Each gauge is manufactured to S.A.A.M.I chamber/headspace specifications. The gauge will measure the maximum cartridge length (COL), the minimum and maximum case length, the maximum case diameter, and the minimum and maximum headspace.|
|Golf Club Demooner Tool (SKU: T1420)Each of these demooners is hand made by Dan Furbee using recycled steel golf club shafts. Available in sizes for 9mm, .38, .40/10mm and .45. See product page to order.||Moon Clip Extractor Tool (SKU: T1403)The Moon Clip Extractor by Ranch Products, is a handy tool to "demoon" moon clips. Works with all calibers and all moon clips.||650 Live Primer Chute (SKU: T1306)The UniqueTek 650 Live Primer Chute Prevents primers from falling onto floor. It captures primers and holds them for reuse. The UniqueTek 650 Live Primer Chute is a "drop-in" replacement for the original Dillon Primer Chute (part #16210) and takes just minutes to install. (Note: May not fit certain older XL 650 presses. See product web page for complete details.)||
Moon Clip - 45 Ruger Redhawk, 45ACP (SKU: T1419-15)Moon Clip Type: Full Moon Clip
Fits: 45 Ruger Redhawk
Capacity: 6 rds
Package: 8 per pack (T1419-15)
|Clarity CLEAN it Lens Wipes (SKU: T1268)Clarity® CLEAN it® Pre-moistened Lens Towelettes - box of 51 tear-open foil packs.||ARIES Powder Ram (SKU: T1308)Powder Compression Die compresses powder before the bullet is seated, preventing bullet deformation and accuracy loss. Available for for rifle cartridges using .224, .243, .264, .284, .308 and .45 caliber bullet, and for 9mm, .38 cal. and .45 cal. pistol cartridges. See the product page for complete information.|
|Marlin Spring Kit (SKU: T1337)The Marlin Spring Kit reduces the spring tension of your Marlin rifle action. It will give you a lighter, smoother action and slightly lighter trigger pull.||Swage It S650 (SKU: T1568-6)The Swage It S650 Primer Pocket Swager for the Dillon XL 650 press. Everything that you need to swage .223/5.56mm, .308/7.62mm or any other calibers that utilize small or large primers. Includes Swages for both small and large primers.||EyeShield (SKU: T1430)The EYESHIELD™ is a flexible molded rubber material that attaches to the eye piece of the binocular or spotting scope. The EYESHIELD™ cradles your eye and prevents ambient light from entering into the space between your eye and the eyepiece of the field optic that causes lens glare. An added benefit is the EYESHIELD™ protects the eyes from wind, rain, snow and dust. This is a must have for everyone who uses binoculars and spotting scopes. (See web site for options.)||650/750 Spent Primer Chute (SKU: T1346-650)The 650/750 Spent Primer Chute™ replaces the blue plastic spent primer cup and bracket on Dillon XL 650 and XL 750 reloading presses. Spent primers are routed through clear PVC tubing into any convenient waste container, so spent primes simply can't bounce out onto the floor! Includes 650/750 Primer Chute™, 3' Clear PVC Tubing and Instructions. Note: Does not fit certain older model 650 presses. See product page for details before ordering.||SOLO Single Stage Press Conversion Kit (SKU: T1553)The SOLO™ Single Stage Press Conversion Kit converts your Dillon RL 550, XL 650 or XL 750 press to a single stage press. This allows you to perform reloading operations that simply cannot be done using a Dillon progressive reloading press. (See product web page for details and to order the correct kit for your press.)||Microfiber Gun Cleaning Cloths (SKU: T1377)Microfiber Gun Cleaning Cloths are uniquely textured and designed specially for cleaning guns.|
|AR Bolt Catch Pin Punch (SKU: T1368)This AR Bolt Catch Pin Punch is specially designed for removing the AR-15 bolt catch pin.||MagMount (SKU: T1468)Magnetized Magazine Mount allows you to organize magazines anywhere you have extra space in your gun safe ... on the door, wall or under a shelf.||550 Spent Primer Chute (SKU: T1346-550)The 550 Spent Primer Chute™ is a Spent Primer Chute for the Dillon RL 550B Press. Spent primers are routed through clear PVC tubing to any suitable container located under your reloading bench. Virtually eliminates spent primers bouncing out and onto the floor.||Ultra-Hanger - 4-Pack (SKU: T1433-4)The Ultra-Hanger™ is perfect for hanging your heavy tactical, hunting, camping and scuba gear. Rated for over 100lb, so it won't break, dumping all your valuable gear on the floor! Sold in 4-Packs. (See product page for details.)||Primer Tube Stand (SKU: T1567)The UniqueTek Primer Tube Stand holds up to 12 primer pickup tubes, 6 on each side, in a horizontal position. The Stand has a base that is wide enough to be stable and not easily tipped over. It assembles in just seconds and can easily be dismantled to save bench space when not in use.||Rossi '92 Spring Kit (SKU: T1434)The Rossi '92 Spring Kit is the best and most complete spring kit available for the Rossi '92. The Main Spring can be adjusted to 5 Tension Levels without cutting the spring.|
|CTS-30000 Precision Counting Scale (SKU: T1445)The CTS-30000 Precision Counting Digital Scale is suitable for a wide range of uses around the loading bench that your powder scale doesn't have the capacity to do ... for example counting the quantity of brass, bullets or loaded ammo in a bin or bag. Weighs in kilograms, grams, pounds and ounces.||.32 ACP Case Gauge (SKU: T1557)Case Gauge for .32 ACP. Precision CNC Machined from Stainless Steel to SAAMI Minimum Chamber Specs.||Thumb Saver (SKU: T1299-01)A simple solution for preventing sore thumbs and reducing loading time with .22 cal. magazines! Fits Ruger Mark I/II/III/IV and 22/45, Browning Buckmark & Challenger III / Colt Woodsman & Huntsman / AMT Lightning, S&W 22A, 22S & 22 Victory and Beretta U22 Neos.||Stoeger Top Lever Spring (SKU: T1552)The Stoeger Top Lever Spring kit is the best and most complete spring kit available for Stoeger Coach and Uplander Side-by-Side Shotguns. Gives you a lighter and smoother feeling Top Lever action, making your Stoeger shotgun easier and quicker to open. The spring can be adjusted to 7 tension Levels without cutting the spring.||Case Mouth & Neck Tension Gauge (SKU: T1522)Case Mouth & Neck Tension Gage. Gauge case mouth diameters from 0.299" to 0.310" and 0.215" to 0.224". See product web page for complete details.||SWAGE GAUGE Primer Pocket Gauge (SKU: T1521)SWAGE GAUGE™ Primer Pocket Gauge. A "Go" and "No-Go" gauge for primer pockets. Available for both small and large primer pockets. (See product web page for more details and to select the size you need.)|
|RCBS Die Wrench (SKU: T1560)The best and last die wrench you'll ever need for 1-3/16″ RCBS die lock rings. Box ends for maximum strength. Thin walled to easily fit between closely spaced dies. Double-ended to fit both 1-3/16″ and 1-1/8″ Die Lock Rings.||1911 End Mill Bit Set (SKU: T1551)This bit set contains all the tooling to rough cut the 1911 frame and drill sear and hammer pin holes. Included: #22 Drill Bit, #35 Drill Bit, #52 Drill Bit, High Speed Steel 7/64″ Key Cutter and High Speed Steel 1/2″ End Mill. (NOTE: All these end mill bits are designed for use in an end mill. A drill press is not recommended.)||MAGnet Gun Caddy (SKU: T1467)The MAGnet Gun Caddy™ conveniently secures your gun when you need to temporarily set it down. It holds just about any long barrel gun upright against your vehicle, gun safe, or any metal surface.||Case Gauge - 9x18 Makarov (SKU: T1574-07)Case Gauge for 9x18 Makarov. Made from Stainless Steel and built to last a lifetime. Each gauge is manufactured to S.A.A.M.I chamber/headspace specifications. The gauge will measure the maximum cartridge length (COL), the minimum and maximum case length, the maximum case diameter, and the minimum and maximum headspace.||Case Gauge - .44-40 Winchester (SKU: T1574-08)Case Gauge for .44-40 Winchester. Made from Stainless Steel and built to last a lifetime. Each gauge is manufactured to S.A.A.M.I chamber/headspace specifications. The gauge will measure the maximum cartridge length (COL), the minimum and maximum case length, the maximum case diameter, and the minimum and maximum headspace.||
Custom Powder Funnel (SKU: T1582)The Custom Powder Funnel supplied is precision machined from top grade 12L14 Steel and hardened to RC55+ … offering an almost unlimited life time of use. The mirror finish of this part yields minimal friction and a smoother release.
These Custom Powder Funnels work so well, you may want to use them on all your pistol cartridge toolheads … even toolheads that are not set up for a Mr. Bulletfeeder!
|Powder Through Expanders (SKU: T1729)If you use the Mr. Bulletfeeder on a Hornady Lock-N-Load® AP™ press, you'll want one of these redesigned Powder Through Expanders (PTX™). The dimensions of the expander tip have been optimized for use with the Mr. Bullerfeeder bullet dropper. Some guys find it works better than the original Hornady PTX™ … even without a Mr. Bulletfeeder.||Port-A-Stand 'Bracket' (SKU: T1426-B)The Port-A-Stand™ 'Bracket' is an ultra-compact, ultra-light target stand. You can easily take multiple sets with you in less space than a single conventional target stand. Just add furring strips and targets, and you are ready to shoot! NEW Black Nitride finish!!! (Sold in pairs.)||SDB Spent Primer Chute (SKU: T1346-SDB)The SDB Spent Primer Chute™ replaces the blue plastic spent primer cup on the Dillon Square Deal 'B' reloading press. Spent primers are routed through clear PVC tubing into any convenient waste container.||GBA Gas Block Aligner (SKU: T1511)The Gas Block Aligner ensures perfect alignment between the gas port hole in your AR15 barrel and gas block. Works with any standard 3/4″ inner diameter gas block and barrel combination, regardless of manufacturer. The Gas Block Aligner is available in both .22 caliber and .30 caliber.||1050 Spent Primer Chute (SKU: T1346-1050)The 1050 Spent Primer Chute™ replaces the blue plastic spent primer cup on the Dillon Super 1050 reloading press. Spent primers are routed through clear PVC tubing into any convenient waste container.||Bullet Seat Stem (SKU: T1561)This custom bullet seat stem contacts SWC bullets at the shoulder, yielding consistent alignment and seating of SWC bullet profiles. Works equally well with FWC bullets! Fits Dillon "New Dynamic" Pistol Seat Die. Available in .45 cal., .40 cal. and .38 cal. (See web page to select the caliber you need.)|
|Dillon Primer Rod with Holder (SKU: T1562)Dillon Primer Rod with Holder. The Primer Rod is made from aluminum and weighs 0.52oz to give positive primer feeding. The Primer Rod has lines at 100 primers, 75 primers, 50 primers and 25 primers and is accurate to ±1 primer. Also included is a Primer Rod Holder, so when you load primers into the tube, you have a convenient place to hang the Rod. Fits on Dillon Squared Deal 'B', RL 550, XL 650, XL 750, RL 1050, Super 1050 and RL 1100 presses.||Front Sight Polish Kit (SKU: T1559)Shines your front sight to make it quick for the eye to eye and more visible in dim light. Kit works on bare metal front sights including Brass, Silver, and all polished or white sights. Kit Includes: 1 double-sided leather-faced polishing stick and 0.3 oz polishing compound.||
Moon Clip - S&W 986 (SKU: T1419-13)Moon Clip Type: Full Moon Clip
Fits: S&W 986 Performance Center
Capacity: 7 rds
Package: 8 per pack (T1419-13)
Moon Clip - S&W 627 - .38 Special (SKU: T1419-12)Moon Clip Type: Full Moon Clip
Fits: S&W 627 Performance Center
Caliber: .38 Special
Capacity: 8 rds
Package: 8 per pack (T1419-12)
Moon Clip - S&W Governor - Combo Pack (SKU: T1419-10)Moon Clip Type: Full Moon Clip & 1/3 Moon - Combo Pack
Fits: S&W Governor
Caliber: .45 ACP
Capacity: Full Moon = 6 rds / 1/3 Moon = 2 rds
Package: 4 Full Moon and 4 2-Shot Clips (T1419-10)
Moon Clip - S&W 686+ (SKU: T1419-07)Moon Clip Type: Full Moon Clip
Fits: S&W 627 Performance Center
Caliber: .38 Special
Capacity: 7 rds
Package: 8 per pack (T1419-07)